Cast Aluminum Printer Bed for 120mm Voron V0.x Printers
This bed incorporates the following features:
-Built in Samarium Cobalt Magnets rated for 300*C and with a
pull of 3lbs each
-CNC Machined, to ensure all features are exactly where they
-Premium cast aluminum plate, we only use MIC6, K100S, and ATP-5
cast plate to make our beds from.
-Machined perimeter - no raw saw cut edges, giving you a
nice finished appearance
-All holes are precisely sized and counterbores made exactly
the size they need to be.
-Build surface locating pins - When using a magnetic build
surface, out locating pins (screws) aid you to placing the removable build
surface, every time.
-Thermal Sensor groove milled into the top surface. This
positions the sensor as close as possible to the build surface, thereby giving
the best possible temperature reading.
-Thermal fuse and earth ground mounting locations – we provide
tapped holes to mount a thermal fuse and an earth ground lead, to facilitate the
safest installation possible.
-Hardware included - We include the required hardware the
build surface stop screws along with the thermal fuse and earth ground mounting
Printable area: 120mm x 120mm
Thickness: 6.35mm 1/4”
Overall size: X=120mm, Y=127
(0.004in) or less